Canon-imageRUNNER-3045 E248 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E248 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E248 0000 Error Code
E248 0000
Description :
The backup memory is faulty.
Causes :
[Cause] A check error has occurred on the backup SRAM board.
[Location] bottom ROM
[Timing of Detection] once when the boot ROM is started up
Solutions :
1. Check the presence/absence of a backup SRAM PCB.
2. Disconnect and then connect the backup SRAM PCB.
3. Replace the backup SRAM PCB with a new one.
If you’re looking over this post and have exposure to this fault and wish to share be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer.
Remember, not every error is exactly identical. What fixes the trouble one occasion may not resolve it the next occasion. While the data in this article is taken from the service manual and normally ought to get your equipment working, on occasion other variables may be in play.
