Canon-imageRUNNER-3045 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re looking over this post and have experience with this error message and want to contribute please make sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will respond.
Remember, not every error is entirely alike. What corrects the trouble one occasion may possibly not remedy it the next occasion. While the content in this write-up is obtained from the service manual and most likely ought to get your device working, in some cases other reasons might be in play.