Canon-imageRUNNER-3045 E064 0005 Error Code

 

Canon-imageRUNNER-3045 E064 0005 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3045 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3045 E064 0005 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3045 E064 0005 Error Code

E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)



Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you’re looking over this piece of content and have knowledge of this fault and desire to contribute please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the difficulty then I will answer.

Remember, not every error is completely the same. What fixes the problem one time will possibly not remedy it the next occasion. While the ideas in this written piece hails from the service manual and oftentimes should get your machine up and running, on occasion other causes might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart