Canon-imageRUNNER-3045 E064 0004 Error Code

 

Canon-imageRUNNER-3045 E064 0004 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3045 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3045 E064 0004 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3045 E064 0004 Error Code

E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)




Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.



If you’re looking over this piece of content and have knowledge of this error and want to contribute you should leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer back.

Remember, not every error is completely the same. What corrects the problem one time might not exactly eliminate it the next time. While the help and advice in this page originates from the service manual and usually ought to get your device operating, from time to time other reasons can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart