Canon-imageRUNNER-3045 E025 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E025 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E025 0001 Error Code
E025 0001
Description :
The hopper motor or the bottle motor is faulty.
Causes :
While the hopper motor is rotating, the motor error lock signal is detected continuously 4 times every 56 msec. Or, while the bottle motor is rotating, the motor error lock signal is detected 22 times in sequence every 10 msec.
Solutions :
Replace the hopper motor.
Replace the bottle motor.
Replace the DC controller PCB.
If you’re looking over this piece of content and have knowledge about this error message and would wish to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the situation then I will answer back.
Remember, not every error is completely alike. What treats the difficulty one time might not solve it the next time. While the tips in this writing is inspired by the service manual and most likely ought to get your unit operational, from time to time other reasons could possibly be in play.
