Canon-imageRUNNER-3045 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you’re looking over this piece of content and have exposure to this problem and desire to share make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will respond.
Remember, not every error is absolutely the same. What remedies the issue one occasion may not remedy it the next time. While the information in this writing hails from the service manual and normally ought to get your device operational, sometimes other things might be in play.
