Home » Canon Repair Articles » Canon-imageRUNNER-3045 E002 0000 Error Code

Canon Repair ArticlesimageRUNNER 3045

Canon-imageRUNNER-3045 E002 0000 Error Code

admin

May 12, 2017

91 Views 0

SaveSavedRemoved 0

Canon-imageRUNNER-3045 E002 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3045 E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Service Manual Instructions for the Canon-imageRUNNER-3045 E002 0000 Error Code

E002 0000
Description :
The rise in temperature of the fixing assembly is faulty.

Causes :
While startup control is under way, the reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
While startup control is under way, the reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.

Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.

Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95

If you’re looking over this piece of content and have exposure to this error message and would wish to make a contribution please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will answer back.

Remember, not every error is absolutely identical. What corrects the situation one occasion might not exactly eliminate it the next time. While the specifics in this short article derives from the service manual and in most cases ought to get your equipment functioning, from time to time other elements might be in play.