Canon-imageRUNNER-3035 E261 0000 Error Code

 

Canon-imageRUNNER-3035 E261 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3035 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3035 E261 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3035 E261 0000 Error Code

E261 0000
Description :
The zero-cross signal is faulty.

Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.




Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.



If you’re looking over this blog post and have information about this problem and wish to make a contribution please leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the issue then I will answer back.

Remember that, not every error is completely the same. What remedies the condition one time may not fix it the next occasion. While the tips in this document originates from the service manual and normally ought to get your machine operating, at times other things can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart