Canon-imageRUNNER-3035 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re looking over this blog post and have experience with this problem and desire to make a contribution please make sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the situation then I will answer back.
Remember that, not every error is completely alike. What corrects the condition one occasion might not remedy it the next occasion. While the information in this blog post is obtained from the service manual and most likely should get your device up and running, sometimes other things could possibly be in play.
