Canon-imageRUNNER-3035 E110 0002 Error Code

 

Canon-imageRUNNER-3035 E110 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3035 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3035 E110 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3035 E110 0002 Error Code

E110 0002
Description :
The scanner motor is faulty.

Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 10 msec after the signal has indicated a locked state.




Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.

Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller


If you’re looking over this blog post and have experience with this malfunction and wish to contribute make sure you leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will answer.

Remember that, not every error is absolutely the same. What treats the situation one time might not remedy it the next occasion. While the ideas in this piece of content is obtained from the service manual and in most cases should get your equipment up and running, on occasion other reasons may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart