Canon-imageRUNNER-3035 E100 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E100 0001 Error Code
E100 0001
Description :
The BD interval is outside a specific range.
Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re looking over this article and have knowledge of this malfunction and would wish to contribute please make sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will respond.
Remember that, not every error is absolutely the same. What treats the condition one occasion may possibly not remedy it the next occasion. While the information in this write-up derives from the service manual and normally should get your machine operating, occasionally other causes can be in play.
