Canon-imageRUNNER-3035 E064 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E064 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E064 0002 Error Code
E064 0002
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you’re looking over this article and have knowledge of this error and desire to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the difficulty then I will answer.
Remember that, not every error is absolutely identical. What treats the problem one time will possibly not remedy it the next time. While the guidance in this page obtain from the service manual and most likely should get your unit working, in some cases other variables might be in play.
