Canon-imageRUNNER-3035 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E014 0002 Error Code
E014 0002
Description :
The rotation of the fixing motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the fixing motor.
Replace the DC controller PCB.
If you’re looking over this article and have experience with this fault and desire to share you should leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will reply.
Realize, not every error is totally the same. What remedies the issue one time might not take care of it the next time. While the ideas in this blog is inspired by the service manual and normally should get your product up and running, in some cases other causes may be in play.
