Canon-imageRUNNER-3035 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you’re looking at this write-up and have knowledge of this problem and would wish to contribute make sure you leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have information about the situation then I will respond.
Realize, not every error is totally the same. What corrects the condition one occasion may possibly not resolve it the next time. While the advice in this write-up comes from the service manual and generally should get your equipment up and running, occasionally other elements may be in play.