Canon-imageRUNNER-3035 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3035 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3035 E000, E001, E002, E003, Error Code Reset
If you’re looking at this write-up and have knowledge of this malfunction and want to make a contribution be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer back.
Realize, not every error is totally identical. What corrects the malfunction one time may possibly not remedy it the next time. While the information in this text obtain from the service manual and in most cases should get your equipment working, in some cases additional factors may be in play.
