Canon-imageRUNNER-3035 E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E003 0000 Error Code
E003 0000
Description :
The fixing temperature is too low after a standby state.
Causes :
While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3035 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3035 E000, E001, E002, E003, Error Code Reset
If you’re looking at this write-up and have knowledge of this fault and wish to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will answer back.
Realize, not every error is totally identical. What corrects the condition one time might not take care of it the next occasion. While the specifics in this written piece derives from the service manual and generally ought to get your product functioning, from time to time other variables could possibly be in play.
