Canon-imageRUNNER-3035 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E001 0001 Error Code
E001 0001
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3035 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3035 E000, E001, E002, E003, Error Code Reset
If you’re looking at this write-up and have information about this problem and want to make a contribution you should leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will answer.
Realize, not every error is simply identical. What treats the issue one occasion might not solve it the next occasion. While the specifics in this article obtain from the service manual and oftentimes ought to get your equipment ready to go, from time to time other things may be in play.
