Canon-imageRUNNER-3035 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E001 0000 Error Code
E001 0000
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode:COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3035 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3035 E000, E001, E002, E003, Error Code Reset
If you’re looking at this write-up and have information about this malfunction and would wish to share please be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will reply.
Realize, not every error is simply identical. What fixes the situation one time might not exactly remedy it the next time. While the content in this article is obtained from the service manual and generally should get your equipment functioning, on occasion other factors might be in play.
