Canon-imageRUNNER-3030 E730 9004 Error Code

 

Canon-imageRUNNER-3030 E730 9004 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3030 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3030 E730 9004 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3030 E730 9004 Error Code

E730 9004
Description :
There is a PDL software error.

Causes :
There is an error in the communication (PAI) with an external controller.




Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.


If you’re looking at this short article and have knowledge about this error and desire to make a contribution please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the problem then I will respond.

Realize, not every error is exactly alike. What fixes the difficulty one occasion might not solve it the next occasion. While the data in this blog post is obtained from the service manual and normally should get your unit up and running, occasionally other elements could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart