Canon-imageRUNNER-3030 E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you’re looking at this piece of content and have information about this error and would wish to contribute please make sure to leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have experience with the problem then I will respond.
Please remember, not every error is totally identical. What corrects the problem one occasion may not remedy it the next occasion. While the info in this article originates from the service manual and in most cases should get your device operational, now and again other variables may be in play.
