Canon-imageRUNNER-3030 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re looking at this piece of content and have experience with this problem and desire to make a contribution make sure you leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will answer.
Please remember, not every error is simply alike. What treats the difficulty one occasion may not solve it the next occasion. While the advice in this page hails from the service manual and oftentimes should get your device operating, on occasion other causes may be in play.
