Canon-imageRUNNER-3030 E064 0004 Error Code

 

Canon-imageRUNNER-3030 E064 0004 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3030 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3030 E064 0004 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3030 E064 0004 Error Code

E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)




Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.



If you’re looking at this piece of content and have experience with this fault and desire to make a contribution please leave a comment down below. Or, if you have read this article and have more questions then ask. If I have knowledge about the problem then I will reply.

Please remember, not every error is precisely alike. What remedies the situation one occasion will possibly not eliminate it the next occasion. While the info in this posting derives from the service manual and most often should get your machine functioning, on occasion other reasons could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart