Canon-imageRUNNER-3030 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3030 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3030 E000, E001, E002, E003, Error Code Reset
If you’re looking at this document and have knowledge about this fault and would like to share please be sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.
Please remember, not every error is entirely identical. What treats the condition one time may possibly not resolve it the next occasion. While the data in this writing comes from the service manual and usually ought to get your device up and running, in some cases other elements can be in play.
