Canon-imageRUNNER-3030 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E001 0000 Error Code
E001 0000
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode:COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3030 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3030 E000, E001, E002, E003, Error Code Reset
If you’re looking at this document and have information about this error message and would like to make a contribution be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will answer back.
Please remember, not every error is entirely identical. What remedies the situation one occasion might not get rid of it the next occasion. While the material in this blog originates from the service manual and in most cases should get your equipment operational, now and again other things may be in play.
