Canon-imageRUNNER-3025N E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you’re looking at this article and have knowledge about this error message and wish to contribute you should leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the issue then I will respond.
Note, not every error is simply identical. What remedies the situation one occasion might not get rid of it the next occasion. While the ideas in this article is inspired by the service manual and in most cases should get your machine operational, at times additional factors may be in play.
