Canon-imageRUNNER-3025N E609 E610 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E609 E610 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E609 E610 Error Code
E609 E610
Description :
The HDD coding key is faulty.
Causes :
The SRM/PCB is faulty.
The battery has become exhausted,leading to loss of SRAM contents.
Solutions :
Try step 1); if it fails, try step 2).
1) Turn off and then back on the power switch to generate the key once again.
2) If the same error still continues, replace the board on which the SRAM is mounted.
(Keep in mind that doing so will lead to loss of all user data.)
If you’re looking at this article and have information about this malfunction and would like to share please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will answer back.
Note, not every error is simply identical. What remedies the condition one occasion may possibly not take care of it the next occasion. While the specifics in this writing is inspired by the service manual and most likely ought to get your unit working, sometimes other things can be in play.
