Canon-imageRUNNER-3025N E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E261 0000 Error Code
E261 0000
Description :
The zero-cross signal is faulty.
Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.
Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.
If you’re looking at this article and have expertise in this problem and would wish to contribute please leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will respond.
Note, not every error is precisely alike. What treats the issue one time might not fix it the next time. While the info in this page originates from the service manual and generally should get your piece of equipment up and running, at times other variables may be in play.
