Canon-imageRUNNER-3025N E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you’re looking at this article and have experience with this fault and would wish to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will respond.
Note, not every error is exactly identical. What fixes the problem one time might not eliminate it the next occasion. While the guidance in this post is obtained from the service manual and in most cases should get your unit ready to go, occasionally other things might be in play.
