Canon-imageRUNNER-3025N E202 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E202 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E202 0001 Error Code
E202 0001
Description :
There is an error in the detection of the CIS home position.
Causes :
The attempt to detect the home position fails when the CIS is moved forward.
Solutions :
Disconnect and then connect the harness connector.
Replace the following as necessary: scanner home position sensor, scanner motor, reader controller PCB.
If you are reading this write-up and have knowledge of this error and desire to share please be sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will reply.
Note, not every error is entirely the same. What treats the difficulty one occasion might not fix it the next time. While the information in this written piece hails from the service manual and usually should get your product up and running, sometimes additional variables may be in play.
