Canon-imageRUNNER-3025N E064 0003 Error Code

 

Canon-imageRUNNER-3025N E064 0003 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3025N E064 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3025N E064 0003 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3025N E064 0003 Error Code

E064 0003
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)




Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you are reading this write-up and have experience with this problem and would wish to make a contribution you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have experience with the issue then I will answer.

Note, not every error is entirely identical. What remedies the difficulty one time might not exactly get rid of it the next occasion. While the data in this blog obtain from the service manual and generally ought to get your equipment operational, from time to time other causes could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart