Canon-imageRUNNER-3025N E064 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E064 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E064 0002 Error Code
E064 0002
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are reading this write-up and have experience with this malfunction and would wish to contribute make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the situation then I will answer back.
Note, not every error is entirely identical. What remedies the complication one time might not take care of it the next time. While the guidance in this blog post originates from the service manual and usually should get your piece of equipment working, from time to time other causes could possibly be in play.
