Canon-imageRUNNER-3025N E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are reading this short article and have information about this fault and would like to make a contribution you should leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have experience with the issue then I will answer back.
Note, not every error is completely identical. What corrects the problem one time might not resolve it the next time. While the content in this piece of content hails from the service manual and most often ought to get your unit operating, occasionally additional variables could possibly be in play.
