Canon-imageRUNNER-3025N E010 0001 Error Code

 

Canon-imageRUNNER-3025N E010 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3025N E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3025N E010 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3025N E010 0001 Error Code

E010 0001
Description :
The rotation of the main motor is faulty.

Causes :
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.




Solutions :
Replace the main motor.
Replace the DC controller PCB.



If you are reading this short article and have information about this error and would like to make a contribution you should leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer.

Note, not every error is completely alike. What remedies the trouble one time might not exactly take care of it the next occasion. While the info in this posting is inspired by the service manual and oftentimes should get your machine working, on occasion other reasons may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart