Canon-imageRUNNER-3025 E609 E610 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E609 E610 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E609 E610 Error Code
E609 E610
Description :
The HDD coding key is faulty.
Causes :
The SRM/PCB is faulty.
The battery has become exhausted,leading to loss of SRAM contents.
Solutions :
Try step 1); if it fails, try step 2).
1) Turn off and then back on the power switch to generate the key once again.
2) If the same error still continues, replace the board on which the SRAM is mounted.
(Keep in mind that doing so will lead to loss of all user data.)
If you are reading this piece of content and have information about this error message and want to make a contribution please make sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have information about the trouble then I will respond.
Make sure you remember, not every error is exactly the same. What corrects the issue one time might not exactly eliminate it the next occasion. While the specifics in this article comes from the service manual and normally should get your equipment ready to go, on occasion other elements might be in play.
