Canon-imageRUNNER-3025 E202 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E202 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E202 0001 Error Code
E202 0001
Description :
There is an error in the detection of the CIS home position.
Causes :
The attempt to detect the home position fails when the CIS is moved forward.
Solutions :
Disconnect and then connect the harness connector.
Replace the following as necessary: scanner home position sensor, scanner motor, reader controller PCB.
If you are reading this page and have exposure to this problem and wish to share be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will respond.
Make sure you remember, not every error is completely alike. What treats the malfunction one occasion will possibly not eliminate it the next occasion. While the help and advice in this written piece obtain from the service manual and oftentimes should get your device operational, on occasion other things may be in play.
