Canon-imageRUNNER-3025 E100 0001 Error Code

 

Canon-imageRUNNER-3025 E100 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3025 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3025 E100 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3025 E100 0001 Error Code

E100 0001
Description :
The BD interval is outside a specific range.

Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).




Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.


If you are reading this page and have exposure to this error and would like to share be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the situation then I will answer.

Make sure you remember, not every error is absolutely the same. What remedies the complication one occasion might not exactly solve it the next time. While the ideas in this piece of content is obtained from the service manual and typically should get your product functioning, sometimes other causes might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart