Canon-imageRUNNER-3025 E064 0005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E064 0005 Error Code
E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are reading this page and have expertise in this error and would wish to contribute be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will answer back.
Make sure you remember, not every error is absolutely the same. What fixes the malfunction one time may not solve it the next occasion. While the tips in this posting is taken from the service manual and usually ought to get your unit operating, sometimes additional variables could possibly be in play.
