Canon-imageRUNNER-3025 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you are reading this page and have experience with this malfunction and want to contribute please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the situation then I will reply.
Make sure you remember, not every error is absolutely the same. What corrects the trouble one occasion might not exactly remedy it the next time. While the help and advice in this piece of content is obtained from the service manual and in most cases should get your equipment working, in some cases other factors can be in play.
