Canon-imageRUNNER-3025 E064 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E064 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E064 0003 Error Code
E064 0003
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are reading this page and have experience with this malfunction and desire to share make sure you leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will respond.
Make sure you remember, not every error is absolutely identical. What treats the issue one occasion will possibly not fix it the next occasion. While the information in this short article comes from the service manual and normally should get your piece of equipment working, now and again additional variables could possibly be in play.
