Canon-imageRUNNER-3025 E064 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E064 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E064 0002 Error Code
E064 0002
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are reading this page and have experience with this fault and wish to share you should leave a comment down below. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will respond.
Make sure you remember, not every error is absolutely identical. What fixes the problem one time might not exactly eliminate it the next occasion. While the material in this written piece comes from the service manual and most often should get your machine operational, from time to time additional factors could possibly be in play.
