Canon-imageRUNNER-3025 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are reading this document and have information about this malfunction and would wish to make a contribution please make sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have exposure to the problem then I will reply.
Keep in mind, not every error is simply the same. What corrects the issue one time might not exactly eliminate it the next occasion. While the information in this page is taken from the service manual and most often should get your unit functioning, sometimes other things could possibly be in play.
