Canon-imageRUNNER-3025 E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E010 0001 Error Code
E010 0001
Description :
The rotation of the main motor is faulty.
Causes :
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are reading this document and have information about this malfunction and would like to share you should leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will reply.
Keep in mind, not every error is simply the same. What corrects the complication one occasion may possibly not fix it the next time. While the details in this blog is inspired by the service manual and typically ought to get your equipment functioning, occasionally other variables may be in play.
