Canon-imageRUNNER-3025 E002 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E002 0000 Error Code
E002 0000
Description :
The rise in temperature of the fixing assembly is faulty.
Causes :
While startup control is under way, the reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
While startup control is under way, the reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 3025 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3025 E000, E001, E002, E003, Error Code Reset
If you are reading this document and have exposure to this problem and would like to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the issue then I will answer back.
Keep in mind, not every error is simply alike. What treats the situation one time may not solve it the next occasion. While the data in this article derives from the service manual and oftentimes should get your machine up and running, on occasion additional factors can be in play.
