Canon-imageRUNNER-3025 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 3025 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3025 E000, E001, E002, E003, Error Code Reset
If you are reading this document and have exposure to this error and desire to share make sure you leave a comment down below. Or, if you have read this article and have further questions then ask. If I have information about the trouble then I will respond.
Keep in mind, not every error is simply alike. What fixes the condition one occasion may possibly not fix it the next occasion. While the details in this written piece is taken from the service manual and usually should get your machine functioning, sometimes other things might be in play.
