Canon-imageRUNNER-2870 E805 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E805 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E805 0000 Error Code
E805 0000
Description :
There is a fan error.
Causes :
While the fan is at rest, the lock signal has been detected for 5 sec.
While the fan is in operation, the lock signal is not detected for 5 sec.
Solutions :
Replace the fan.
Replace the DC controller PCB.
If you are reading this document and have expertise in this error and want to share be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will respond.
Keep in mind, not every error is precisely the same. What treats the condition one time might not fix it the next time. While the info in this document originates from the service manual and normally should get your machine ready to go, on occasion other causes may be in play.
