Canon-imageRUNNER-2870 E748 1001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E748 1001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E748 1001 Error Code
E748 1001
Description :
There is a mismatch between controller board and SDRAM size.
Causes :
There is a mismatch between the control board and the SDRAM.
Solutions :
Check the correct combination between board and SDRAM.
If you are reading this document and have experience with this malfunction and desire to share please leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will answer.
Keep in mind, not every error is precisely the same. What treats the complication one occasion might not remedy it the next occasion. While the help and advice in this text is inspired by the service manual and generally should get your product up and running, from time to time additional circumstances might be in play.
