Canon-imageRUNNER-2870 E743 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E743 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E743 0000 Error Code
E743 0000
Description :
There is an error in the DDI communication.
Causes :
An SCI error has occurred. The received data is faulty. A reception timeout condition has occurred. An SEQ timeout error has occurred.
Solutions :
Disconnect and then connect the flexible cable used to connect the reader unit and the printer unit.
Replace the following as necessary: flexible cable, reader controller PCB, main controller PCB.
If you are reading this blog post and have exposure to this malfunction and want to share make sure you leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer back.
Keep in mind, not every error is entirely identical. What corrects the situation one occasion may possibly not take care of it the next occasion. While the content in this posting obtain from the service manual and in most cases ought to get your piece of equipment functioning, occasionally other elements could possibly be in play.
