Canon-imageRUNNER-2870 E732 0001 Error Code

 

Canon-imageRUNNER-2870 E732 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E732 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E732 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E732 0001 Error Code

E732 0001
Description :
There is an error in the communication with the scanner.

Causes :
There is a DDI-S communication error.




Solutions :
1. Check the connector used to connect the scanner.
2. Check the power supply of the scanner (to see if initialization takes place at startup).
3. Replace the reader controller, scanner board, or main board as necessary.


If you are reading this blog post and have expertise in this fault and wish to contribute make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will respond.

Keep in mind, not every error is entirely alike. What fixes the malfunction one time may not eliminate it the next occasion. While the tips in this blog derives from the service manual and usually ought to get your machine functioning, at times other factors may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart