Canon-imageRUNNER-2870 E730 9005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E730 9005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E730 9005 Error Code
E730 9005
Description :
There is a PDL software error.
Causes :
There is a fault in the connector of the vide cable to the external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you are reading this article and have knowledge of this malfunction and desire to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will reply.
Keep in mind, not every error is completely the same. What treats the trouble one occasion might not solve it the next time. While the info in this article is obtained from the service manual and oftentimes ought to get your piece of equipment working, at times additional variables can be in play.
