Canon-imageRUNNER-2870 E716 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E716 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E716 0000 Error Code
E716 0000
Description :
There is an error in the communication with the pedestal.
Causes :
After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec.
Solutions :
Check the cable. Replace the DC controller PCB.
Replace the pedestal drive PCB.
If you are reading this article and have exposure to this problem and want to make a contribution you should leave a comment down below. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will answer back.
Keep in mind, not every error is completely alike. What corrects the situation one occasion might not exactly resolve it the next occasion. While the info in this blog post is taken from the service manual and most often ought to get your unit operating, at times additional variables can be in play.
